Product Categories
(Total 12 Products for How To Install Electric Sensor)
The output form of the encoder: NPN open collector output, PNP open collector output, complementary output, voltage output, linear drive output. Determine the output form of the encoder according to what signal the subsequent device input can receive (which can be reflected in the naming rule).
Encoder parameters: electrical interface: encoder output methods commonly include push-pull output (F type HTL format), voltage output (E), open collector (C, common C is NPN type tube output, C2 is PNP type tube output) ), long-line driver output. Its output mode should match the interface circuit of its control...
The encoder is a combinational logic gate circuit that converts the numbers of different bases
Electric photocell sensor encoder
The form of the encoder shaft: the shaft is extended and must be equipped with a coupler before it can be used; the hollow shaft, without a coupler, can be directly used on the other equipment.
Absolute analog encoder encoder
The output phase of the encoder: A phase, A phase and B phase, A phase and B phase and Z phase, according to the specific function that the customer hopes to achieve, determine how many phases the output phase needs (this can be reflected in the naming rule).
The parameter that the encoder pays attention to: Resolution: That is, the number of pulses output per revolution when the encoder is working, whether it meets the design and use accuracy requirements
The advantages of the magnetostatic absolute encoder: moderate volume, direct measurement of linear displacement, absolute digital encoding, no theoretical range limit; no contact, no wear, resistance to harsh environments, and can be used under 1000 meters; rich interface forms, diverse measurement methods; The price...
Optical linear displacement sensor
Matrix reading, with high impact resistance, strength capability to error correction high reliability, and installation sizes small, wide range of resolution, do not require the signal conditioning. Assembly requirements are less, and has compensation ability of motor shaft radial and axial shifting, widely used in...
The working principle and function of the encoder: It is a rotary sensor that converts the rotation displacement into a series of digital pulse signals
Magnetoelectric proximity switch encoder
Each position of the absolute encoder corresponds to a certain digital code, so its indication is only related to the start and end positions of the measurement, and has nothing to do with the middle process of the measurement.
The COM terminal of the encoder is connected with the PLC input COM terminal, and the A and B two-phase pulse output lines are directly connected with the PLC input terminal. When connecting, pay attention to the response time of the PLC input.
Rotary encoders output pulses during rotation, and the position (plc) is known by counting equipment. We usually use incremental encoders. The output pulse signal of incremental encoders can be directly input to the PLC, using the high speed of the PLC. The counter counts its pulse signal to obtain the measurement...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
