Home > Products
All Products
Sensor for optical encoder

Model No.:  IMG_1428

The materials of the encoder code disc are glass, metal, plastic. The glass code disc is deposited on the glass with very thin scribe lines, which has good thermal stability and high precision. The metal code disc is directly engraved with through and impassable lines and is not fragile. However, due to the certain...
Absolute rotary encoders encoder

Model No.: PCE-60-S2

If you want to measure rotation beyond 360 degrees, you must use a multi-turn absolute encoder
Encoder and decoder in communication

Model No.: HI72K20

The encoder is a rotary sensor that converts the rotation displacement into a series of digital pulse signals. These pulses can be used to control the angular displacement. If the encoder is combined with a gear pin or screw screw, it can also be used to measure linear displacement
Encoder for medical coding

Model No.: HI25S

According to the detection principle, the encoder can be divided into contact type, photoelectric type, magnetoelectric type and pulse disc type digital encoding disc
Incremental rotary encoders encoder

Model No.: HI72K 8

Encoder connection cable failure: This type of failure has the highest probability of occurrence, and it is often encountered during maintenance and should be a priority factor. Usually the encoder cable is open circuit, short circuit or poor contact. In this case, the cable or connector needs to be replaced. Special...
Handheld pulse generator encoder

Model No.: HSC-2(1)

The characteristics of rotary encoders: output in accordance with the rotational displacement of the shaft. Through the coupling to the rotating shaft, the rotation displacement can be directly detected
Pulse generator hp encoder

Model No.: HSC-2(3)

Features of the rotary encoder: It has rich resolution and output specifications. The appropriate encoder can be selected according to specific conditions such as required accuracy, cost and connection circuit
Optical linear displacement sensor

Model No.: HLS51(2)

Matrix reading, with high impact resistance, strength capability to error correction high reliability, and installation sizes small, wide range of resolution, do not require the signal conditioning. Assembly requirements are less, and has compensation ability of motor shaft radial and axial shifting, widely used in...
Linear encoder low cost

Model No.: HA113K 5

The absolute encoder is a sensor that directly outputs digital quantities. There are several concentric code tracks along the radial direction on its circular code disc. Each track is composed of light-transmissive and opaque sectors. The fans of adjacent code channels The number of zones is a double relationship. The...
Mini absolute rotary encoders

Model No.: HA50S 4

Each position of the absolute encoder corresponds to a certain digital code, so its indication is only related to the start and end positions of the measurement, and has nothing to do with the middle process of the measurement.
Optical encoder disks encoder

Model No.: H-LXA D

The working principle and function of the encoder: It is a rotary sensor that converts the rotational displacement into a series of digital pulse signals. These pulses can be used to control the angular displacement. If the encoder is combined with a gear bar or a spiral screw, it is also Can be used to measure linear...
Rotary encoder pulse encoder

Model No.: HLS95

Absolute encoder, each position corresponds to a digital value of displacement
Encoder sensor usage encoder

Model No.: HA170S 8

At present, the consumption of absolute value encoders in the market is not small, and the price of absolute value encoders is relatively high relative to the price of incremental encoders, which are mainly used for measuring displacement.
Motor with encoder encoder

Model No.: HI66SFA 4

Main considerations for the encoder: pay attention to the allowable shaft load during installation, and must not exceed the limit load
Motor with encoders encoder

Model No.: HI66k 5

Absolute encoder advantages: no need to remember, no need to find a reference point, anti-interference characteristics, data reliability, higher resolution, fast starting speed, multi-axis precise motion control, multiple communication protocols. Disadvantages: The difficulty of installation and debugging is high
Optical encoder digikey encoder

Model No.: HA58K 1

Classified by encoder mechanical installation: shaft type. Shaft type can be divided into clamping flange type, synchronous flange type and servo mounting type. Bushing type. The sleeve type can be divided into half hollow type, full hollow type and large diameter type.
Decoder and encoder encoder

Model No.: HI66SFA 3

The main points for attention of the encoder: the encoder and the external connection should avoid rigid connection, but should adopt elastic coupling, use gear or synchronous belt to connect transmission
Encoder encoder pulse encoder

Model No.: HI38k 2

Incremental encoders usually have three signal outputs (there are six signals for differential): A, B and Z, generally TTL level, A pulse in front, B pulse in the back, A and B pulses are 90 degrees apart, sent out every turn A Z pulse can be used as a reference mechanical zero position
Optical sensor price encoder

Model No.: HI66k 1

In the industrial field, an encoder refers to a sensor device that converts displacement into a digital signal. Encoders are used to detect the speed, position, angle, distance or count of mechanical movement, and convert angular displacement or linear displacement into electrical signals
Encoder typet digital transducer

Model No.: HI38k 3

If you use PLC to collect data, you can choose a high-speed counting module; if you use an industrial computer to collect data, you can choose a high-speed counting board; if you use a single-chip microcomputer to collect data, it is recommended to choose an input port with a photocoupler
Motor feedback encoder encoder

Model No.: HA113K 7

Absolute is the characteristic of the encoder: it can directly read the absolute value of the angle coordinate; there is no cumulative error; the position information will not be lost after the power is cut off. But the resolution is determined by the number of bits in the binary system, which means that the accuracy...
Small optical encoders encoder

Model No.: HA113K 6

The characteristic of the absolute encoder is that it does not need a counter, and a fixed digital code corresponding to the position can be read out at any position of the shaft. Obviously, the more code channels, the higher the resolution. For an encoder with N-bit binary resolution, the code disk must have N code...
Micro optical encoder encoder

Model No.: HI38S 6

Encoder-specific term: output signal phase difference When two-phase output, the relative time difference between two output pulse waveforms
Magnetic Ring Encoder encoder

Model No.: HA42S 7

From an industry perspective, elevators, machine tools and servo motors are the key application areas of encoders, accounting for 53% of the overall application market. Textile machinery, packaging machinery, printing machinery and other fields currently have a small market share. Encoders generally do not directly...
Home > Products
Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send