Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
(Total 11 Products for Encoder Sensors)
Optical encoder sensors encoder
The rotary encoder is a device used to measure the speed. The photoelectric rotary encoder can convert the angular displacement and angular velocity of the output shaft into corresponding electrical pulses for digital output (REP) through photoelectric conversion Electrical parameters Resolution 10-1024P/R 10-1024P/R...
The resolution of the encoder refers to the smallest angle change that the encoder can read and output. The corresponding parameters are: number of lines per revolution (line), number of pulses per revolution (PPR), minimum step distance (Step),( 58854019,Bit) etc Electrical parameters Resolution 10-5000P/R 10-5000P/R...
The COM terminal of the encoder is connected with the PLC input COM terminal, and the A and B two-phase pulse output lines are directly connected with the PLC input terminal. When connecting, pay attention to the response time of the PLC input.
Sensors optical encoder encoder
Encoders can be divided into absolute type encoder, brush (contact) encoder, channel encode, chronometric encoder, command encoder, digital position encoder, digital shaft encoder, digital voltage encoder, diode matrix encoder, error signal encoder, experimental digital television encoder, incremental encoder,...
For the encoder after subdivision, the number of reticles before subdivision is very important, and the system accuracy before subdivision is even more important. Subdivision can improve the resolution, but cannot improve the accuracy, and may even reduce the accuracy
In the industrial field, an encoder refers to a sensor device that converts displacement into a digital signal. Encoders are used to detect the speed, position, angle, distance or count of mechanical movement, and convert angular displacement or linear displacement into electrical signals
Electro optical sensors encoder
The various electromagnetic interference sources at the encoder production site interfere with the photoelectric detection device, causing the output waveform of the photoelectric detection device to be distorted, causing the system to malfunction or causing a production accident.
Rotary encoders are usually used in positioning systems with servo feedback. In this case, the cost of the encoder is generally not important. But the encoder is also used to encode the position of the knob on some user interfaces, such as the volume knob on an audio system
2. The encoder reasonably selects the output signal transmission medium of the photoelectric detection device, and uses twisted-pair shielded cables to replace ordinary shielded cables
The displacement or offset of the transmitter or receiver of the encoder due to mechanical vibration and other reasons causes the receiver to be unable to receive the optical signal reliably and cannot generate the electrical signal
Encoder improvement measures: change the installation method of the photoelectric encoder. The photoelectric encoder is not installed on the motor shell, but a fixed bracket is made on the basis of the motor to install the photoelectric encoder independently. The photoelectric encoder shaft and the motor shaft center...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.